Drinking Water RO System Direct Drinking Water RO Water Treatment System

Dringking water RO system preprocessing requirements:

1. The reverse osmosis pretreatment must be able to remove most of the impurities in the raw water to meet the water inlet requirements;

2. Reverse osmosis pretreatment must consider changes in water quality to prevent fluctuations in raw water quality from affecting the stable operation of the entire system;

3. The reverse osmosis pretreatment process must be able to operate efficiently and stably, while simplifying the process as much as possible to reduce investment and operating costs

Flow chart of Ro Water Treatment System

Source water tank → source water booster pump → multi-media filter → activated carbon filter  → precision filter → primary RO reverse osmosis pure water system → secondary RO reverse osmosis pure water system → water gas mixer →Ozone sterilizer→Stainless steel pure water tank

Main Parts Introduction:
1. Raw Water Pump — provide the pressure to quartz sand filter/active carbon filter;
2. Multi-medium Filter — get rid of turbidity, suspended matter, organic matter, colloid, ect.;
3. Active Carbon Filter — remove the color, free chloride, organic matter, harmful matter, ect.;
4. Precision Filter — can further remove the suspended solids and other impurity from water, is made of micro-hole chinaware, micro-hole non-toxin plastic and cell pipe core;
5. High Pressure Pump — provide the high pressure to RO membrane;
6. RO System — main part of the plant. The RO membrane’s desalting rate can reach 99%, removing over 99% ions.